Wayne County. Our own reading at its map point gives 1,249. The low point is 320 feet on the Ohio River in Posey County, footnoted to the Corps of Engineers
Open two weekdays and two Saturdays a month in season, on a permit, after a safety briefing and a signed acknowledgment of danger
Fabrication for Indiana ridge roads
The work here is protection against sustained gravel and against the underside damage that comes from soft, rutted clay rather than from rock gardens. Tower Ridge Road lost a section to storm damage in July 2025 and has been closed since, which is a fair picture of what southern Indiana does to a gravel road after heavy rain.
Anything bolted on should survive salt. Winter operations run from mid November to mid March statewide and snow and ice removal is the first priority, which means brine on everything you drive in that window. Ask for coatings and drainage in racks, bumpers and skid plates.
When a catalog part does not exist for your vehicle, does not fit with what you already have, or is not strong enough for what you do, a fabricator builds it. Steel or aluminum, welded, finished, and mounted so the load goes into structure rather than sheet metal.
They also fix what breaks: cracked mounts, bent sliders, torn brackets and the frame damage that ends trips.
Common work
01Bumpers with winch mounts and rated recovery points
02Rock sliders and skid plates
03Roof racks, bed racks and ladders
04Swing-outs for tires, fuel and water
05Mounts for tanks, compressors and batteries
06Frame and bracket repair
How to choose a fabricator
Metalwork is easy to judge if you know where to look.
01Look at the welds, then at how the part mounts. Recovery points and sliders should tie into the frame.
02Ask whether they design in CAD or build to the vehicle, and whether you get drawings.
03Ask about material and finish. Raw, painted and powder coated parts age very differently.
04Ask if they have built for your platform before. Templates and fixtures save you money.
05Ask how a front bumper affects airbag sensors and crush zones. A shop that has done it properly will have an answer.
What to have ready before you ask for a quote
Photographs do most of the talking.
01Clear photos of the vehicle and the area the part mounts to
02What is already mounted there: winch model, lights, tire size
03What the part has to carry, and how much it weighs
04Steel or aluminum, and the finish you want
05A budget range and your timing
Questions people ask
Custom or off the shelf?
If a well-made part exists for your vehicle, it is usually cheaper and faster than custom, and a good fabricator will tell you so. Custom earns its cost when nothing fits, when parts from different makers have to work together, or when you need it stronger or lighter than the catalog offers.
Steel or aluminum?
Steel is stronger for the money, easier to repair in the field and heavier. Aluminum saves real weight on racks, skid plates and boxes, but costs more and needs a welder who works with it regularly. Many builds use both: steel where it hits rocks, aluminum where it just carries things.
Can a fabricator repair a cracked frame or mount?
Often, yes. Send clear photos with your request. A good shop will tell you whether it can be repaired properly or needs replacing.
How high is Indiana?
From Tell City at 421 feet to Hoosier Hill at 1,257.
Altitude decides what your engine, your brakes and your lungs have to work with, and how late in the year the passes open.
02,000
Feet above sea level
Towns
RichmondOn the Historic National Road, the nearest city to Hoosier Hill979 ft
BloomingtonThe base for Monroe Lake, Tower Ridge Road and the Deam Wilderness770 ft
BedfordWhere the Hoosier National Forest keeps its supervisor’s office684 ft
ChestertonThe main approach to Indiana Dunes and its state park640 ft
PaoliOrange County services for Youngs Creek and Springs Valley625 ft
BrownstownJackson-Washington State Forest, Skyline Drive and the Knobstone Trail623 ft
Michigan CityEast end of the national park shoreline, on US 12620 ft
MartinsvilleNorth gateway to Morgan-Monroe State Forest and its back country area605 ft
NashvilleBrown County services beside Yellowwood State Forest596 ft
CorydonHarrison County, at the edge of Harrison-Crawford State Forest590 ft
LintonThe town by Redbird, one of two state off-road areas536 ft
EnglishCrawford County, between the Hoosier’s sandstone cliffs and the Ohio River byway507 ft
MadisonOhio River services on the byway east of the forest491 ft
JasperFull services in Dubois County before Patoka Lake and Ferdinand State Forest468 ft
LynnvilleThe town by Interlake, the larger state off-road area463 ft
Tell CityOhio River town at the south end of the Hoosier, near the Tell City ranger district421 ft
Passes, high roads and summits
Hoosier HillThe highest point in Indiana, on farm ground in Wayne County. Our own reading of the elevation surface at its map point gives 1,249 feet1,257 ft
Weed Patch HillOur own reading of the elevation surface at its map point, in the Brown County hills1,055 ft
PinnacleOur own reading of the elevation surface at its map point, in the Jackson County knobs954 ft
PinnacleSkyline Drive, Jackson-Washington State Forest954 ft
Nebo RidgeOur own reading of the elevation surface at its map point, on the ridge the Hoosier’s 8.6 mile trail follows921 ft
Hickory RidgeOur own reading of the elevation surface at its map point, on the ridge above the Deam Wilderness horse trails908 ft
Hickory RidgeTower Ridge Road: Indiana 446 south of Bloomington to the Deam Wilderness trailheads and the lookout tower908 ft
Low GapOur own reading of the elevation surface at its map point, at the gap that names the road along Morgan-Monroe’s back country area782 ft
Low GapMorgan-Monroe State Forest roads782 ft
German RidgeOur own reading of the elevation surface at its map point, in the Perry County hills above the Ohio781 ft
Hardin RidgeOur own reading of the elevation surface at its map point, above Monroe Lake781 ft
German RidgeGerman Ridge Recreation Area road: Indiana 37 south to Indiana 70, then east less than a mile to the signed turn781 ft
Hardin RidgeHardin Ridge Road off Indiana 446: Indiana 446 south of Bloomington by Chapel Hill Road to Monroe Lake781 ft
Mount HoldenOur own reading of the elevation surface at its map point, one of the named dunes at Indiana Dunes State Park758 ft
Mount TomOur own reading of the elevation surface at its map point. The state says its dunes tower nearly 200 feet above Lake Michigan751 ft
Mount TomIndiana Dunes State Park roads751 ft
Mount JacksonOur own reading of the elevation surface at its map point, the third of the named dunes at the state park742 ft
Pass, road and summit elevations are the figures published by the agency that manages them. Town elevations are the town’s or county’s own
figure where it publishes an exact one; the rest are from the U.S. Geological Survey (3D Elevation Program at the place’s official coordinates),
retrieved September 18, 2026. Every source is listed at the foot of the page.
Free build quotes
Looking for fabricators in Indiana? Tell us about the project and get free quotes.
